ENGINEERED CAPABILITIES
Four pillars of residential infrastructure
Why Services is one page, not four. Four thin service pages would split link equity, dilute keyword targeting, and add clicks between a visitor and the form. A single deep specification document keeps every conversion path one scroll long and reads as an authoritative engineering standard.
10GbE / 25GbE OPTICAL BACKBONE · 30-DAY ON-SITE RETENTION · 100% OFFLINE LOCAL CONTROLLERS · 20A/32A CONDITIONED POWER
Pillar #networking
Enterprise networking
Wired and wireless coverage that holds up in every room, on every device, at once.
What's included
- Physical RF site survey and predictive spectrum heat map
- Structured Category 6A / Category 7 shielded cabling home-runs to all drop points
- Centralised wall-mount or floor-standing 19-inch steel rack enclosure
- Multi-gigabit managed PoE+ switching with dedicated VLAN isolation
- Enterprise ceiling-mounted Wi-Fi 7 access points with zero-handoff roaming
- Dual-WAN automatic failover gateway preventing internet dropouts
- Certified Fluke throughput and cable attenuation test report
Typical hardware specification
▸ Access Points: Ubiquiti UniFi U7 Pro / Ruckus R760 Tri-Band Wi-Fi 7
▸ Switching: Enterprise 24/48-Port Multi-Gigabit PoE+ (2.5GbE / 10GbE SFP+)
▸ Cabling: Belden / CommScope 10GXS Category 6A F/UTP LSZH Solid Copper
▸ Gateway: Dual-WAN Enterprise Security Gateway with wire-speed IDS/IPS
▸ Enclosure: Middle Atlantic / APC 19-inch Wall-Mount Hinged Steel Rack (12U–24U)
How it's installed in an existing home
Cable pathway discovery: Before cutting or drilling, we map internal wall cavities, ceiling voids, and subfloor access paths using non-invasive acoustic sensors and micro-inspection cameras.
Concealed execution: Cable home-runs are routed through existing service chases, behind architectural baseboards, or through discreet crawlspaces to eliminate drywall damage.
Centralized termination: All runs converge inside a dedicated utility cupboard or basement rack enclosure, cleanly punched down to shielded patch panels with Velcro dressing.
Pillar #security
Security & surveillance
Cameras, access and alarms on one system you actually control, with footage that is still there weeks later.
What's included
- PoE optical camera design with complete perimeter sightline planning
- On-site enterprise Network Video Recorder (NVR) with 30+ days continuous retention
- Tamper-resistant vandal-proof optical domes and 4K perimeter tracking optics
- Isolated security VLAN preventing unauthorized camera network traversal
- Encrypted local-first video storage with zero mandatory cloud subscriptions
- Direct encrypted WireGuard VPN remote viewing without cloud streaming exposure
- Integrated smart video intercom with two-way audio and motorized gate control
Typical hardware specification
▸ Cameras: Axis M32-LVE / Hikvision DeepinMind 4K Optical PoE Vandal Domes
▸ NVR Storage: Enterprise 16-Channel 4K NVR with Western Digital Purple Pro (30+ Day Retention)
▸ Intercom: DoorBird D2101V IP Video Door Station with Integrated RFID & Keypad
▸ Access: Assa Abloy / Yale Real Living Commercial Z-Wave/PoE Mortise Smart Locks
▸ Network: Isolated Layer-2 Security VLAN with Dedicated PoE Budget Management
How it's installed in an existing home
Perimeter sightline analysis: We audit exterior entrance angles, driveway approaches, and garden perimeters to calculate exact lens focal lengths and eliminate blind spots.
Discreet exterior penetration: Power-over-Ethernet cables pass through micro-drilled soffits and architectural weather seals, requiring zero visible outdoor conduit runs.
Hardwired lock & intercom integration: Video intercoms and smart access hardware mount cleanly onto existing door jambs, connected directly to the isolated security backbone.
Pillar #automation
Home automation
Lighting, climate, blinds, audio and entry that work together and keep working when the internet does not.
What's included
- Local automation controller executing 100% on-premises without cloud dependency
- Circadian architectural lighting control and synchronized scene presets
- Multi-zone HVAC climate scheduling integrated with passive presence sensors
- Motorized architectural shade coordination linked to solar azimuth tracking
- Multi-room high-resolution audio streaming with discrete in-ceiling speakers
- Custom engraved architectural keypads and intuitive touchscreen wall mounts
- Fully documented automation scenes that the homeowner can edit independently
Typical hardware specification
▸ Controller: Home Assistant Yellow Enterprise DIN / Lutron RadioRA 3 Main Repeater
▸ Lighting: Lutron Sunnata RF Keypads & Phase-Adaptive Dimmers with Warm-Dimming LED Drivers
▸ Climate: Ecobee Smart Thermostat Pro with Multi-Room Passive Presence & Temperature Sensors
▸ Audio: Sonos Port / Bluesound Professional Multi-Zone Streamers with Episode In-Ceiling Speakers
▸ Mesh Radios: Silicon Labs MGM240 Multiprotocol Thread / Zigbee 3.0 Border Routers
How it's installed in an existing home
Standard junction box retrofitting: Existing light switches and dimmers are replaced directly inside standard wall boxes with architectural RF keypads that look custom-built.
Non-invasive sensor placement: Multi-sensors for climate and occupancy mount flush on walls or tuck discretely into joinery, communicating via low-latency local RF mesh.
Local commissioning & tuning: We program all circadian curves, evening relaxation scenes, and departure modes directly on your on-premises hub before handing over full ownership.
Pillar #ai-infrastructure
AI-ready infrastructure
The power, cooling, network capacity and rack space to run local AI and future systems without another install.
What's included
- Infrastructure rack sizing, thermal airflow modelling, and acoustic isolation
- Dedicated 20A / 32A power circuits with commercial rack-mounted UPS conditioning
- 10GbE / 25GbE optical fibre intra-rack backbone designed for multi-gigabit throughput
- GPU-capable edge compute provisioning for private local speech and vision models
- Centralized on-premises network attached storage (NAS) with automated snapshot backups
- Real-time power monitoring and automated graceful shutdown during prolonged grid blackouts
- Documented physical and thermal headroom for next-decade hardware expansion
Typical hardware specification
▸ Rack Enclosure: Middle Atlantic C2 / APC NetShelter Soundproof Acoustic 24U Server Cabinet
▸ Power Conditioning: Eaton 9PX / APC Smart-UPS Online 3000VA Double-Conversion UPS
▸ Optical Backbone: MikroTik / Ubiquiti 10G/25G SFP28 Aggregation Switch with OM4 LC Fiber
▸ Edge Inference Server: 2U Rackmount Dual-GPU Local Inference Host with NVIDIA RTX Edge Computing
▸ Storage: Synology Enterprise 4-Bay RackStation with ECC RAM & Encrypted NVMe Cache
How it's installed in an existing home
Thermal and acoustic placement: We locate a basement, utility room, or under-stair storage area, measuring ambient airflow and background noise to ensure zero household disturbance.
Dedicated electrical run: A certified electrician pulls an isolated 20A or 32A clean electrical circuit directly from your main breaker panel to the rack’s online UPS.
Vibration & airflow conditioning: Equipment is secured within an acoustically dampened rack enclosure with thermostatically controlled whisper-quiet fans that vent heat away cleanly.
Frequently asked questions
Our installations are engineered for clean retrofits. We route cables through floor voids, wall cavities, and discreet architectural conduits without wholesale drywall demolition. We complete work room-by-room and leave work areas tidy at the end of each day.
A standard 4–6 bedroom residence typically requires 2–3 days for cable pulling and rough-in, followed by 1 day for rack enclosure termination, and 1 day for on-premises controller commissioning, firmware hardening, and client handover.
Yes. During our initial site assessment, we test existing coax and Cat5/6 runs for attenuation. Existing lighting circuits, motorized shades, and audio zones are bridged into the local controller via open protocols (Matter, Zigbee, Z-Wave, Lutron RF).
We provide a 5-year workmanship guarantee on all cabling terminations, manufacturer warranties on commercial hardware (typically 3–5 years), and complimentary 90-day post-commissioning firmware calibration and remote support via private WireGuard VPN.
Projects scale from single-discipline upgrades (e.g. enterprise networking from $3,500) to complete four-pillar infrastructure overhauls (structured cabling, 4K optical surveillance, local automation, and conditioned server rack) typically ranging from $8,000 to $25,000 depending on home scale.
Cloud-dependent consumer devices create security vulnerabilities, introduce internet latency, charge perpetual subscriptions, and stop functioning during ISP outages. Local hardware keeps all surveillance footage and automation logic strictly within your private network forever.
Infrastructure pillars
Book a site assessment
Request an obligation-free architectural conduit audit and RF heat-map analysis for your residence.
Private residential infrastructure engineered for zero cloud reliance, enterprise performance, and architectural elegance in luxury occupied homes.
● Registered Master Cabler ACMA-8842
Direct Contact
- +1 (800) 555-0199
- contact@smarthome.developer-zannatul.com
- Greater Metro & Regional Estates
- Mon–Sat: 8:00am – 6:00pm
Credentials & Trust
- Master Cabler #ACMA-8842
- $20M Public Liability Insured
- 5-Year Workmanship Warranty
- Occupied Home Protection Protocol
Copyright © 2026 Smart Home TEK. All rights reserved. Developed by Zannatul